Hydraulic fluid power Ð
Gas-loaded
accumulators Ð
Dimensions of gas ports
BS ISO
10945:1994
This International Standard specifies the types and the dimensions of the gas filling ports of gas-loaded accumulators used in hydraulic fluid power Systems.
lt describes two male ports for filling the gas side of a gas-loaded accumulator. These ports are designated by the following:
- male port with M16 x 2 thread, in accordance with ISO 261 and ISO 724, which is preferred for new designs (see 4.1);
- male port with 8Vl thread in accordance with ISO 4570-1 (see 4.2).
Gas-loaded
accumulators Ð
Dimensions of gas ports
BS ISO
10945:1994
This International Standard specifies the types and the dimensions of the gas filling ports of gas-loaded accumulators used in hydraulic fluid power Systems.
lt describes two male ports for filling the gas side of a gas-loaded accumulator. These ports are designated by the following:
- male port with M16 x 2 thread, in accordance with ISO 261 and ISO 724, which is preferred for new designs (see 4.1);
- male port with 8Vl thread in accordance with ISO 4570-1 (see 4.2).
المشاركات
Thanks for this detailed piece of information! I like this post.
ردحذف