Road vehicles — Brake lining frictionmaterials — Standard performance test
procedure for commercial vehicles with air brakes
BS ISO 26865:2009
This International Standard applies to commercial vehicles of the categories M2, M3, N2, N3, O3 and O4, as defined in UNECE R.E.3, which are equipped with air brakes.
This International Standard applies during product development, product prototypes, product specification or
validation, and ongoing series production, as defined in ISO 15484.
When used in conjunction with other applicable standards or test procedures, this International Standard is intended to provide a complete assessment of a friction material’s adequacy for use in a certain application, market or vehicle platform.
NOTE Applicable standards and test procedures include ISO, JIS/JASO (Japanese Industrial Standard/Japanese
Automotive Standards Organization), SAE (Society of Automotive Engineers), Federal Codes or regulations, and other
project or company-specific testing programmes.
This International Standard does not include performance requirements related to stopping distance or braking force distribution, under different vehicle conditions of speed, temperature, tyre-to-road adhesion, loads and operating conditions of the braking system, as indicated in Federal Codes or Regulations.
This International Standard specifies a single-ended inertia-dynamometer performance procedure, which is intended to standardize the various procedures for commercial vehicles equipped with air brakes into one unique procedure covering all performance requirements of interest.
procedure for commercial vehicles with air brakes
BS ISO 26865:2009
This International Standard applies to commercial vehicles of the categories M2, M3, N2, N3, O3 and O4, as defined in UNECE R.E.3, which are equipped with air brakes.
This International Standard applies during product development, product prototypes, product specification or
validation, and ongoing series production, as defined in ISO 15484.
When used in conjunction with other applicable standards or test procedures, this International Standard is intended to provide a complete assessment of a friction material’s adequacy for use in a certain application, market or vehicle platform.
NOTE Applicable standards and test procedures include ISO, JIS/JASO (Japanese Industrial Standard/Japanese
Automotive Standards Organization), SAE (Society of Automotive Engineers), Federal Codes or regulations, and other
project or company-specific testing programmes.
This International Standard does not include performance requirements related to stopping distance or braking force distribution, under different vehicle conditions of speed, temperature, tyre-to-road adhesion, loads and operating conditions of the braking system, as indicated in Federal Codes or Regulations.
This International Standard specifies a single-ended inertia-dynamometer performance procedure, which is intended to standardize the various procedures for commercial vehicles equipped with air brakes into one unique procedure covering all performance requirements of interest.
It was so interesting to read, really you provide good information.
ReplyDeleteBrake Lining