CamTrax64 program from Camnetics
Introduction
CamTrax64 is an object oriented/property driven cam design program. It is not the intent of CamTrax64 to replace your CAD system but to augment the CAD system with a user interface that will allow the cam designer to accurately visualize the cam components before they are modeled in the CAD system.
A CamTrax64 base component is either a cylinder or a cube. A cylinder can have paths inserted on both ends and/or the cylindrical surface. A cube can have paths inserted on the upper or lower surface. Each path has a single cam follower. This follower can be translating or oscillating. A path may also be a dual follower (two cam followers of the same diameter) so a ridge is created along the
centerline of the path.
Posts
No comments:
Post a Comment
thanks for your visit